How to assemble a fishing rod?

Watch the video

How to assemble a fishing rod?

Before you go to look for a pond for fishing, you need to prepare your working tool - a fishing rod. In this article we will tell you in detail how to assemble a fishing rod and what parts are needed for this.

How to collect a float fishing rod

Preparing the rod

To begin with, we list the main fishing gear,which we need for fishing: fishing rod, fishing line, reel, float, hook, sinker. If you have it all, you can start the build process. We take the rod and, if it is a composite, we collect it, for which we carefully insert the individual parts into each other. If you have a telescopic rod, then just pull and fix the parts. Take care also that the rod can then be easily disassembled.

Choosing a fishing line

The line should be selected based on the type of fish thatYou want to catch, but in most cases a standard fishing line with a thickness of 0.2 mm is suitable, since it is capable of withstanding loads up to 2 kg. Usually this is more than enough for shore fishing. Next, you need to wind the fishing line on the reel in case you use it. However, there are rod designs with motovillers for fishing line. In this case, first, impose a line on the motoviltsa, then pass it to the top through the rings and again lower to the rod of the rod. Then take the rod with one hand, and the line - the other and check its length. If the line is half a meter or slightly longer than the rod, then you have fixed it correctly. Otherwise, change the design and check again.

Float, hooks, sinker

The next step is to fix the float on the fishing line. When choosing a float, pay attention to its color (to better be seen). Also note that the float should be selected depending on the current in the pond and weather conditions. Different floats are suitable for different types of water bodies and weather.

After you have installed the float, it'stime to fasten the hook. Most often it is attached by several nodes for reliability. Experienced anglers advise not to leave the long end of the line, as there is a risk that it will prick the fish before it hits the hook. Given this point, we attach the hook so that at the end of the line we have a length of no more than 1.5 mm.

Now we need to carry out the loading of the tackle, and ourthe fishing rod will be ready. This is the only action that can be carried out right on the pond just before fishing. Experiment with the weight of the weights so that the float does not sink completely when attaching the sinker. It is also desirable that the float does not lie on the water.

Well, - our rod is ready! Now you know how to properly assemble a fishing rod. If you did everything right, then consider that your fishing is already half successful, as preparing the tackle is very important for good fishing. The second half is a competent choice of the reservoir and the time of fishing. If some things are not clear for you, on the Internet now you can find a lot of video on how to assemble a fishing rod. Good luck in fishing!

Related news

How to assemble a fishing rod

How to assemble a fishing rod

How to assemble a fishing rod

How to assemble a fishing rod

How to assemble a fishing rod

How to assemble a fishing rod

How to assemble a fishing rod

How to assemble a fishing rod

How to assemble a fishing rod

How to assemble a fishing rod

How to assemble a fishing rod How to assemble a fishing rod How to assemble a fishing rod How to assemble a fishing rod How to assemble a fishing rod How to assemble a fishing rod How to assemble a fishing rod How to assemble a fishing rod How to assemble a fishing rod How to assemble a fishing rod How to assemble a fishing rod How to assemble a fishing rod How to assemble a fishing rod How to assemble a fishing rod How to assemble a fishing rod How to assemble a fishing rod