What is a glue ceiling and how to equip itSeptember 19, 2018
Glue ceilings are a practical, rather aesthetic and universal method for decorating a ceiling surface. Under these ceilings understand the finish, made of polystyrene plates. They are glued directly to the rough ceiling surface, for which they received the name. What qualities does this lining have and how does the process of its creation look like?
In what situations is appropriate glue ceiling
Initially, this method of finishing was actively used for the decoration of the ceiling surface in office premises. Now polystyrene tiles are widely used in the repair of http://primecity.construction/ in ordinary apartments and houses. Perhaps the glue ceiling is misplaced in the living room or children's room. But in the hallway, in the hallway, in the bathroom and in the kitchen, he will be in place. At least for the reason that the tile from polystyrene has absolute moisture resistance.
How to lay glue tiles on the ceiling
1.Preparatory events. On polystyrene tiles, patterns or deep relief are usually present. Thanks to him, some disadvantages of the rough surface are compensated. But still it is desirable to align the ceiling. Let it be the most coarse treatment with plaster, but the largest irregularities after it will disappear. The best option is to hem the ceiling with drywall panels.
2. Gluing tiles to the ceiling. To finish looked more aesthetic, you should start sticking from the center. It can be found if the diagonal of the ceiling is marked with a cord. Where they intersect, and is the center. For high-quality gluing tiles, the surface must also be primed first. Further, the adhesive composition (it can even be ordinary PVA glue) is applied on the reverse side in the form of a snake. The element is pressed against the ceiling, smoothed and held for about 30 seconds. Now you can proceed to sticking the next tile. You can cut polystyrene with a regular stationery knife without special tools.
3. Elimination of defects and decoration. Covering the entire surface, it remains only to get rid of excess glue, which could tread between the tiles. It is not necessary to use sealant to fill the joints.Instead, it is better to paint the tile in the desired shade. Then the seams will become less noticeable.
With a fairly simple technology arrangement glue the ceiling endowed with excellent practical performance and interesting appearance. The owner can safely refer to this method of finishing.